Home / Products / copd-6 USB Screener

copd-6 USB Screener

Handheld device with USB connectivity, for COPD screening

$1.00

The Vitalograph copd-6™ BT identifies those at risk of COPD at the pre-symptomatic stage, screening out those whose FEV1 is normal.  The screener allows early medical intervention and facilitates better clinical outcomes.

Generates reports via USB connection and Vitalograph Reports software.

  • Monitors COPD patients using their obstructive index – FEV1 as a percent of predicted
  • Displays FEV1, FEV6, ratio, COPD classification and lung age
  • Automatically sends data after each blow
  • Can also send session data
  • Large, easy-to-read display

One of our 4000 Series of respiratory monitors and screeners, the COPD-6 Monitor comes with:

  • Pouch
  • Instructions for Use
  • Vitalograph Reports Software
  • 2 x AAA Batteries

 

Vitalograph provides free certified training for all of its respiratory diagnostic solutions. Register here.

Click here for reimbursement codes for Vitalograph Devices in the USA.

 

Product Code: 40451_TH

  • Facilitates ‘case selection’ so that spirometry can be focused on those likely to be diagnosed with COPD.
  • Screens out anyone with normal FEV1 without the risk of false COPD negatives.
  • Monitors COPD patients using their obstructive index which is FEV1 as a percent of predicted.
  • Displays FEV1, FEV6, ratio and % predicted, obstructive index, COPD classification and lung age.
  • Built-in quality of blow indicator.
  • Displays the GOLD COPD classification (stage I – IV) to help identify the need for a change in the patient’s management plan.
  • Requires only minimal instruction for use by non-respiratory specialists.
  • Suitable for use with Bacterial Viral Filters (BVF™) providing 99.999% cross-contamination efficiency.
Respiratory Monitor COPD-6 USB
Model4000
Dimensions109mm (length) x 63mm (width) x 42mm (height)
Flow Detection PrincipalStator rotor
AccuracyBetter than ± 3%
Measurement Range0 – 9.99 L BTPS
Power Supply2 x AAA batteries
Battery Life3 months of use, 3 tests per day
Quality CheckSlow start of test (Vext>5%) or a cough detected in the first second
FEV substituted for FEV6When FET < 3s and abrupt end of test
Performance StandardsATS/ERS 2019 Technical Standards, ISO 23747:2015, ISO 26782:2009
QA/GMP StandardsEN ISO 13485, FDA 21 CFR 820, MDSAP.
CommunicationsUSB2.0/3.0
PC Requirements for Vitalograph ReportsWindows® 7, Windows® 8 or Windows® 10
Auto Power Down Time2 minutes

Product Specification

 asma-1asma-1 Childasma-1 USB/BTCOPD-6COPD-6 USB/BTlung monitorlung monitor USB/BTlung monitor BT Smartlung age
PEF
FEV1
FEV6
FEV1 Ratio
FEF25-75
FEV0.5/0.75
Lung Age
Memory600600600002002002000
Personal best
GOLD
PDF Reports
Import Data to SpV

FAQs

A BVF is recommended to use if the copd-6 USB is intended for in clinic multi-subject use. The plastic mouthpiece supplied with the device can be used where the device is intended for single-subject use. For subject groups with excessive sputum production, a BVF can be used to protect the device flowhead from exhaled particulate matter where this may be a concern.

(!) appears after a blow if a cough is detected in the 1st second.

If a new BVF is used for every test and the copd-6 USB is stored in a clean, dust free environment, then the device should require only surface cleaning using a 70% isopropyl alcohol wipe. Full instructions available at Model 4000 – Hygiene & Cleaning Instructions.

No, but results can be entered manually.

To connect to a supported mobile App, you would require the lung monitor BT Smart.

Talk to Us

For information on any of our products, click the inquiry button, enter your query and we will get back to you.

Talk to Us

For information on any of our products, click the inquiry button, enter your query and we will get back to you.

Get A Quote